钨钢牌号有哪些？

作者：XYC 时间：2022-07-09 分类：行业新闻

东莞新材料的钨钢牌号及性能对照表介绍.

性能表 Tungsten steel performance table
品种分类 Sorts	材质Grade	HIP	CIP	颗粒 Grain	Co（%）	比重 Density g/cm³	硬度Hardness		抗弯强度T.R.S	用途 Applications
品种分类 Sorts	材质Grade	HIP	CIP	颗粒 Grain	Co（%）	比重 Density g/cm³	HRA	HV	N/mm²	用途 Applications
耐磨系列 Wear-resistant	M10	●		超细Superfine	6	14.8	94	1900	3800	常用粉末冶金模具，也可用于刀片、密封环 Often used for powder metallury dies,and blade,chip.sealed ring and gasket ring.
	M20	●	●	中medium	6.5	14.88	91	1550	3100
	M30	●	●	中medium	8	14.62	89.5	1400	3200	硬度高，很好耐磨性，通用抽拉模具 High hardness,wear-resistant,used widely in common drawing dies.
	M33	●	●	超细fine	8	14.6	92	1700	3800	常用于较硬材料的拉深模 Used widely in drawing dies which is for high rigidity mat'l
耐磨耐冲击系列 Wear& impact-resistant serices	C10	●		中medium	10	14.3	89	1200	3430	韧性、硬度极佳，是常用冲头、衬套、入子、镶件较好材料，也是成形模具、卷圆模、轧形模、应力较大拉深模不错材料选择 Tonghness and hardness are good,widely used in punches,bushes.cavity inserts,core inserts.You also can choose this material for forming dies,curling circle dies,roll shape dies,bid stress drawing dies.
	C30	●	●	中medium	15	14.2	87	1070	3500
	C15	●		细fine	13	14.06	91	1550	3600	适用于精密五金薄片冲压、引线框、IC模，不适用厚片冲压
	C15	●		细fine	13	14.06	91	1550	3600	Used for punching precise hardware,ironware sheets,guiding frame,IC dies.Can't be used for puknching thick sheets.
	C35	●		细fine	15	13.85	89.5	1320	3700	通过各类薄片冲压、引线框、LED支架、IC模、电机定转子等
	C35	●		细fine	15	13.85	89.5	1320	3700	Used commonly for sheet punching,guiding frame,LED frame.IC dies,rotor-stator.
	C38	●		中细 Medium fine	12	14.2	89	1400	3300	专用矽铜片、EI片冲压 Used for punching steel sheet,E&I sheet.
	C78	●		细fine	12	14.1	90	1450	3950	专用线切割、电火花加工场合 Can be used specially when wire cut,EDM.
	C40	●	●	粗tongh	20	13.6	84	850	2850	常用冷冲、冷镦、冷挤模具 Used in common cold punching dies,cold heading dies,cold extruding dies.
	C40	●	●	粗tongh	20	13.6	84	850	2850
	C50	●	●	粗tongh	22	13.4	83	780	2950	应用于应力较大的场合，如螺丝、螺母、锻造等 Used when stress is big,such as screw,screw nut forging dies.
超微粒系列	QX05	●		微superfine	7	14.6	94	1950	3520	极高硬度，只适合冲击力较小耐磨件，刀具 Superhigh hardness,only used for small impacts and knife.
超微粒系列	QX10	●		微superfine	8	14.6	92.8	1730	3800
Supering grade	QX20	●		微superfine	10	14.45	91.8	1550	4200
Supering grade	QX30	●		微superfine	12	14.15	92.3	1640	4000
高温系列 Hear resistant	R20		●	中medium	专利patent	13	83	780	2550	热锻模 Used in hot forging dies.
高温系列 Hear resistant	R50		●	中medium	专利patent	13.2	84	850	2550	热挤中小型型材，热锻模 Medium and small sections extruded,hot forging dies.
非磁性系列	W10	●	●	中medium	Ni	14.3	89.5	1320	1500	应用于应力较小的无磁性磨件 Used in non magnetic wear resistant parts whose's stress is small.
非磁性系列	W10X	●	●	细fine	Ni	14.3	92	1760	2700	常用磁性成型模 Used in common magnetic forming dies.
Non magnetic	W30	●	●	中medium	Ni	14	87	1160	3000
	W35	●	●	细fine	Ni	13.8	86.5	1070	2900
	W40	●	●	中medium	Ni	13.5	85.5	930	3000
本公司保留以上参数变更权利

上一篇: 钨钢产品变形的原因有哪些呢？

下一篇: 洛氏硬度中HRA、HRB、HRC的区别 —东莞市夏阳新材料有限公司